This list includes 27 Tools that start with V, from “V-belt tension gauge” to “Voltmeter”. They range from hand tools and measuring instruments to electrical testers and power tools. Common uses include repair, measurement and basic installation.
Tools that start with V are handheld, powered, or measuring instruments used for building, fixing, and testing. For example, the voltmeter became central to electrical troubleshooting since early telegraph days.
Below you’ll find the table with Tool, Purpose, Primary materials, and Typical users.
Tool: Brief name used to identify each item, so you can scan the list and find specific tools quickly.
Purpose: Clear one-line summary of what the tool does, helping you decide its relevance at a glance.
Primary materials: Main materials or construction types, so you know durability and suitability for different jobs.
Typical users: Common groups who use the tool, which helps you match tools to your skill level or profession.
Tools that start with V
| Name | Type | Typical size/power | Common materials & variants |
|---|---|---|---|
| Vacuum cleaner | power tool | 1-20 gal (4-75 L) capacity; 500-1,200 W motor | plastic body, steel tank; shop vac, handheld, canister |
| Vacuum former | power tool | benchtop platen 12-24 in (300-600 mm) | aluminum frame, heating element, vacuum pump |
| Vacuum gauge | measuring tool | 0-30 inHg (0-100 kPa) typical range | steel/ABS housing; analog and digital variants |
| Vacuum lifter | accessory | 100-1,500 lb (45-680 kg) capacity common | rubber suction pads, aluminum frame; electric/hydraulic variants |
| Vacuum pump | power tool | 1-20 CFM (0.5-9.5 L/s); 75-1,500 W typical | cast iron or aluminum body; rotary vane/diaphragm variants |
| Vacuum sealer | power tool | seal bar 8-12 in (200-300 mm); 100-500 W | plastic housing, heating element; chamber and external types |
| Valve core remover | hand tool | 4-6 in (100-150 mm) | hardened steel tip, plastic or steel handle |
| Valve key | hand tool | 10-18 in (25-45 cm) length for curb/stop valves | forged steel rod, T-handle variants |
| Valve lapping tool | hand tool | 4-8 in (100-200 mm) typical handle length | steel spindle, rubber suction cup, abrasive paste |
| Valve seat cutter | cutting tool | pilot sizes 1/4-1 in (6-25 mm) bits | hardened steel or carbide cutters |
| Valve spring compressor | hand tool | 8-18 in (200-450 mm) depending on engine | steel frame, C-clamp or overhead styles |
| Vane pump | power tool | 0.5-10 GPM (2-38 L/min); 100-2,000 W typical | cast iron or aluminum body, rotary vane design |
| Varnish brush | hand tool | 1-4 in (25-100 mm) brush widths common | natural or synthetic bristles, wooden or plastic handle |
| V-belt tension gauge | measuring tool | measures 0-100 lbf or deflection; handheld | steel or plastic body; dial or digital types |
| V-bit | cutting tool | shank sizes 1/8-1 in (3-25 mm) | steel shank, carbide tip; V-profile variants |
| V-block | accessory | 1-6 in (25-150 mm) length typical | hardened steel, with clamp or magnetic variants |
| V-groove router bit | cutting tool | shank 1/4-1 in (6-25 mm); angles 20-90° | steel body, carbide tip variants |
| Veneer hammer | hand tool | 10-16 in (250-400 mm) handle lengths common | steel head, wooden handle; magnetic variants |
| Veneer roller | hand tool | 2-6 in (50-150 mm) roller width common | rubber or foam roller, wood or metal frame |
| Veneer saw | hand tool | 6-12 in (150-300 mm) blade length | thin steel blade, wooden or plastic handle |
| Vernier caliper | measuring tool | 6 in (150 mm) common; 12 in (300 mm) larger | stainless steel; digital or vernier styles |
| Vernier height gauge | measuring tool | 12-36 in (300-900 mm) height bases | steel column, dial or digital readout |
| Viscometer | measuring tool | rotational ranges ~10-10,000 cP; benchtop or handheld | stainless steel spindles, plastic housing variants |
| Vise/Vice | hand tool | 4-8 in (100-200 mm) jaw width common for bench vises | cast iron or steel body, steel jaws, wooden jaw pads |
| V-tool (carving) | hand tool | cutting widths 1/4-1 in (6-25 mm); 6-10 in handles | carbon steel blade, wooden handle |
| Voltage tester | measuring tool | non-contact 50-1,000 V AC detection; handheld | plastic probe, electronic sensor |
| Voltmeter | measuring tool | 0-600 V ranges common; handheld or benchtop | plastic or metal housing, analog or digital |
Descriptions
Vacuum cleaner
Sucks dust and debris for cleanup; plastic/metal construction; used by homeowners, workshops, and contractors.
Vacuum former
Heats plastic sheets and forms them over molds; metal frame and heater; used by prototypers, hobbyists, and educators.
Vacuum gauge
Measures vacuum pressure; metal/plastic body; used by HVAC techs, mechanics, and lab technicians.
Vacuum lifter
Suction-based lifter for glass or panel handling; aluminum/rubber construction; used by glaziers and installers.
Vacuum pump
Creates vacuum for HVAC, bagging, and labs; metal body; used by mechanics, HVAC techs, and hobbyists.
Vacuum sealer
Removes air and seals bags for storage or bagging; plastic/metal parts; used in kitchens and craft/repair shops.
Valve core remover
Tool for removing Schrader valve cores; hardened steel tip; used by cyclists, mechanics, and HVAC technicians.
Valve key
Turns buried curb or water supply valves; steel construction; used by plumbers, utility workers, and homeowners.
Valve lapping tool
Seats and grinds valve faces with abrasive paste; steel and rubber; used by mechanics and engine restorers.
Valve seat cutter
Cuts or refaces engine valve seats; hardened steel/carbide; used by machinists and engine builders.
Valve spring compressor
Compresses valve springs for removal and installation; steel; used by mechanics and automotive DIYers.
Vane pump
Positive-displacement pump for fluids; metal construction; used in workshops and industrial systems.
Varnish brush
Applies varnish and finishes; bristles with wood/plastic handle; used by painters and woodworkers.
V-belt tension gauge
Measures belt tension on drives and fans; metal/plastic; used by mechanics and maintenance technicians.
V-bit
Cuts V-shaped grooves and lettering for signs and trim; carbide/steel; used by woodworkers and CNC operators.
V-block
Holds round stock for layout and machining; hardened steel; used by machinists and hobbyists.
V-groove router bit
Profiles V-grooves in wood and plastics; carbide/steel construction; used by woodworkers and CNC users.
Veneer hammer
Taps veneer into adhesive and helps flatten sheets; steel and wood; used by cabinetmakers and luthiers.
Veneer roller
Rolls out air bubbles and spreads glue on veneer; rubber/wood; used by woodworkers and restorers.
Veneer saw
Cuts veneer sheets cleanly with minimal tear-out; thin steel blade; used by fine woodworkers and furniture makers.
Vernier caliper
Measures internal, external, and depth dimensions accurately; steel construction; used by machinists, engineers, and DIYers.
Vernier height gauge
Measures and marks heights on surface plates; cast iron/steel base; used by machinists and toolmakers.
Viscometer
Measures liquid viscosity for paints, oils, and fluids; metal/plastic; used by labs, paint makers, and technicians.
Vise/Vice
Holds workpieces steady for cutting, drilling, shaping; cast iron/steel; used by woodworkers, metalworkers, and hobbyists.
V-tool (carving)
V-shaped chisel for carving grooves and lettering; steel blade; used by woodcarvers and sign makers.
Voltage tester
Checks presence of live voltage and basic faults; plastic/electronics; used by electricians and homeowners.
Voltmeter
Measures electrical potential difference; plastic/metal housing and display; used by electricians, hobbyists, and lab techs.